How to Jump Start A Car?

If your vehicle battery has died or is not starting due to some technical reasons, you can make use of jumper cables to jump start it from some good and charitable person’s vehicle. If you know how to safely use jumper cables to kick start your car, make sure the battery on the Good Samaritan’s vehicle has sufficient voltage as your own. As long as you attach the cables properly with your battery, it’s hardly a matter of concern whether your vehicle has negative ground and the person who is helping you jump start your vehicle has a positive ground or the fact that your vehicle is equipped with an alternator and the other vehicle has a generator.

Car

To safely jump start a vehicle, BP Auto Spares India, the known Man Spare Parts dealer has put together quick and easy steps.

Look for a Good Vehicle with Good Battery: Isn’t this an obvious factor to look at? How you’ll going to jump start a vehicle without the help of a good vehicle witha good battery? You simply can’t, so first locate a vehicle with a good battery and enough voltage to give it a push. Trust us; a dead battery is a phenomenon most of the vehicle drivers have experienced at least once, so they’ll be more than happy to guide you in jump starting your vehicle.

Bumper-to-Bumper: In order to begin with the whole process, position the good vehicle with the good battery in a manner that its bumper is face-to-face with the bumper of your vehicle, only leaving a handful of distance for you to maneuver between the cars. Make sure both your vehicle and the one helping you are completely turned off before you begin connecting the jumper cables to the batteries. It will not only protect your vehicle’s electrical system from unexpected gush but it will also keep your safe under the hood.

Correct Way to Connect Jumper Cables to a Car

  1. Locate the positive (+) and the negative (-) end of each battery.
  2. On latest vehicle models, the positive (+) end of the battery often has a red cover over the battery post and wires.
  3. Now, connect the red cable to the positive (+) end of the working battery.
  4. Attach the other end of the red cable to the positive (+) end of the dead battery.
  5. Connect the black cable to the negative (-) end of the working battery.
  6. Finally, attach the other end of the black cable to the grounded surface on the vehicle with the dead battery.

This grounded surface is the metal part of the vehicle’s frame.

Start the Engine of a Vehicle with a Good Battery: Let the engine idle for a few minutes.Don’t give race to the engine, but do rev the engine a little above idle for 30-60 seconds. This is done to charge the battery of the dead car. After a few minutes, try to start your engine. If your engine comes to life without any further delay, leave both the cars running for a few minutes in order to charge the battery of the dead vehicle fully.

In the end, don’t forget to thank the Good Samaritan who allowed you to use his vehicle to Jump Start Your Car.

Leave a comment

Your email address will not be published. Required fields are marked *