Tag Archives: Suzuki Spare Parts

Warranty on Used Suzuki Car Parts – What Consumers Should Expect

Suzuki Car Parts

It can be a challenge to find used Suzuki Car Parts with the right warranty. Several variables and factors decide the availability of a car spare part you are looking for. Also, the factor remains undecided that how inclusive and how long the warranty may be. One of the major factors that decide the type of warranty on used auto parts is the type of car parts you wish to purchase.

Let us look at the main categories of spare parts to understand this well.

Mechanical Parts

This type of parts mainly includes moving components and mechanical functions, like transmission, engine, front and rear axle assembly, etc. The warranty you can expect on the purchase of these spare parts requires most thought and deliberation. That is because these parts are most likely to have some issues. They have wear parts and moving parts that can eventually cause trouble and require replacement at the end. In this case, you must not accept these spare parts if the warranty period is less than 90 days. For Suzuki car parts, a minimum 90-day window is required to understand if they are functioning properly.

Electric Parts

This type includes starter, alternator, radio, window switches, and various other electric automotive parts. Sometimes it can be hard to get a warranty for these items because of the finicky nature of electronic items. However, if you are looking for used items, you must keep in mind that they can have issues and buying them without proper warranty can put you in trouble in the future. So, for electric parts, you should look for a minimum period of 30 days as a warranty. That way, you will have enough time to gauge the condition of the electronic parts.

Body and Suspension Parts

These are the toughest parts of a vehicle. Warranty is not a crucial factor for these parts, especially for Suzuki Car Parts, they are unlikely to fail even after a number of months and even years. However, to be on the safer side, it is always advisable to for these types with a warranty period of 90 days.

If you are satisfied with the parameters for each spare part type, then go ahead and make the purchase.

What Are Some of the Essential Spare Part Items That Your Car Needs

Genuine Suzuki Spare Parts

If you own a Suzuki car and want to ensure your vehicle gives the right mileage, you must opt for Suzuki car spare parts and not any other brand’s products.

There are other top brands as well in the market like TATA, Audi, BMW, etc., but it is important to opt for the one that would perfectly fits your car. All branded spare parts are now available online and you can choose the best possible one per your need.

Let us discuss some of the Suzuki car spare parts that form an integral part of Suzuki brand and must be installed properly in your car without fail.

  • Braking system

o   In order to avoid accidents or unpleasant incident on the road, you must invest in good quality brakes. Additionally, ensure you have car brake pads installed as well for extra safety. Besides, don’t forget to buy car brake shoes. These are essential spare parts and are readily available on reputed online stores.

  • Spark plugs

o   The main function of spark plugs is to keep the car safe and running in all conditions. They form an integral part of Suzuki car spare parts. And also for any other car parts. Replacing them with new one from time to time can prevent damage of car engine.

  • Oil and lubes

o   One of the primary functions of oil and lubes is to ensure that there is no greasing in the assembly in the other spare parts of the car.

  • Belts

o   As the saying goes, “prevention is better than cure”, having strong belts attached to all the seats is important. This is not just for the person driving the car, but also for people sitting in it. You must install seat belts for passengers who sit in the front as well as for those at the back.

o   In addition to the belts, you must also think of investing in good quality shock absorbers. They are useful during the time of emergency.

You must always buy original Suzuki car spare parts for your Suzuki car. Any other brand might not be a good idea and can adversely affect your car’s engine.

Importance of Using Genuine Spare Parts

Genuine Suzuki Spare Sarts

When a car owner sends their car to a service store, it can turn out that the car needs new spare parts. Replacing old parts with new and genuine Suzuki spare parts can help to extend the longevity of a car.

One of the major reasons that spare parts need to be changed periodically is the accidental damage or if they reach the threshold of durability.

Replacing the spares

Often a simple repair of the spare parts can make them last a long time; however, there comes a time when there arises a need to replace them entirely. And when replacing the old with the new, it is always advisable to go for the trusted brands like the Suzuki spare parts and other popular ones in the market. The main reason why car owners should opt for branded materials over locally made goods is the trust factor. The braded materials understand the need and specification of a car owner, thereby ensuring the spare parts fit perfectly to their vehicles.

Genuine spare parts fit perfectly

In case of car spare parts, each model has typical design and specification. The branded ones like Suzuki spare parts are specially made to fit perfectly. Additionally, braded materials bring sustainability and authenticity which can guarantee good functioning of the car.

Genuine products come with warranty

Genuine and original products made by authentic brands offer replacement guarantee to car owners. Thus, a product if found faulty within the warranty period; can be easily replaced with a new one. Generally, the warranty period varies between 12 to 24 months depending on brands. For Suzuki spare parts period is often more than 12 months, which allows car owners ample time to replace the defective piece in case any issue arises.

Most of these spare parts are available online, as most of the top brands have their presence on the web. So, for customers, it is easy to order them online.

Are You Seeking a Good Company Dealing in Suzuki Spare Parts?

Suzuki Spare Parts

Why are genuine auto spare parts better?

Genuine auto spare parts are devised by the automobile company keeping in mind the varied specifications of the automobile parts and machinery. These spare parts are designed by them to fit their machines exactly. They are well aware of the heat resistance capacity of each part and careful devise the spares so that they can withstand friction and wear and tear. When another company makes first copy spare parts, they might make the design same to same from the outside but will miss on the technical specifications. When such duplicate parts are installed in the automobiles, they break or melt easily leading to repeated maintenance issues with the automobile. This proves that genuine auto spare parts such as Suzuki Car Spare Parts are much better when compared to duplicate spare parts.

Duplicate spare parts are cheaper as compared to genuine auto spare parts

Suzuki car spare parts are very high in demand in India as Suzuki is one of the highest selling vehicles in India. The demand for its spare parts is also very high. There are many companies manufacturing cheaper spare parts with a vision to earn more money by fooling the people to buy cheaper spare parts. But once a car owner buys these spare parts, his automobile does not run as efficiently as it did with Suzuki spare parts. Although he must have purchased the Suzuki spare parts at low rates, he will likely have to invest again in genuine spares this time to make this automobile run smoothly. He will end up paying more than he would on genuine parts.

So from where can I source genuine Suzuki Car Spare Parts?

BP Auto Spares India is one such company which sells genuine Suzuki spare parts. The company has a huge inventory of Suzuki spares at affordable rates and company certified prices. They give you an assurance of the quality and also, at any given time, also have all the different parts available so that you do not have to wait for long to repair your automobile.

They also have a team of passionate employees who understand your passion for your Suzuki vehicle and strive towards 100% customer satisfaction. At BP Auto Spares India, you get the best for your beloved Suzuki Vehicle!

Buy Trustable Suzuki Car parts from Authentic Dealers

Do you want to buy the spare parts of Suzuki car? If your answer is yes then it is necessary for you to compare the best available spare parts to choose the best ones from them. The high-quality parts of your car will surely help you to boost the mileage and other things of your car. Many professional online stores can offer you to buy the Suzuki Car Partsat some affordable prices. You can prefer to buy the spare parts of Suzuki from online stores because of the variety and quality they can offer.

Buy Better Suzuki Car Parts

The Suzuki Car Parts are also available on various professional online stores. If you have a Suzuki Alto car then it is necessary for you to keep it secure from various damages and accidents. In some of the cases, your alto car can face harmful accidents and because of that, you have to change the damaged parts of your car with the higher quality new spare parts. The quality of newly purchased spare parts can decide the comfort of your journey in your Suzuki alto car. So, you can prefer to buy the spare parts of this car from the authentic dealers of this same line.

Buy Trustable Suzuki Car parts from Authentic Dealers

How to choose the best Suzuki Car Parts?

The purchasers who want to buy the best available Suzuki Car Parts can use the following points of this blog, for knowing about how you can choose the better Suzuki spare parts. You can buy the body parts of Suzuki Esteem, Suzuki wagon-R, Suzuki Swift Parts and other car’s spare parts from a reliable seller of Suzuki Car Parts. Check out the things which can help you to buy the best spare parts:

  • You should look to buy 100% original spare parts
  • The professional selling company will have a great collection of spare parts
  • The replacement will be provided by the Suzuki Car Parts companies.
  • You can check the fast delivery services of these company
  • You can compare the customer services also
  • The buyers will need to check the certificates of the spare parts selling the company

These points will surely help you to buy the Suzuki Car Parts along with some other buying benefits, so, purchase wisely and get the best available spare parts for Suzuki.

Link

Suzuki Car Spare Parts

Why is It Important to Use Original Car Spare Parts?

If you are answering the above question in a yes then I am here to discuss a few important things with you. I will be talking about suzuki car spare parts that you need to know, understand and deal with in and out, so that you actually drive your Suzuki car like a master.

Well, dealing with auto spare parts is not a video game play. One actually has to undergo a lot of effort to find the right spare part for your car if the same is damaged in an accident or a wreck. A lot of research and knowledge is required to reach the original parts if you wish to keep the duplicates and cheap parts at bay. Suzuki Automobiles always recommends original spare parts to be used, which are manufactured by OEMs across the globe and marketed by authorized dealers in the nation. This helps to keep the warranty and resale price of the vehicle intact. This would include the service warranty in the scenario when the part starts to malfunction and causes further damage to the car. All the insurance claims can also become void if you are not using original or recommended suzuki spare parts in your car.

Thus, it is always better to look for, obtain and use original parts for your Suzuki vehicle which also enhance the performance of your car. Any contract clauses on the service, warranty, and insurance of the vehicle are adhered to and increase the life of your vehicle manifolds.

Obtaining the original auto parts at the best prices can be a tricky part but it can be dealt with. If you have a thorough knowledge and gathered database on the original equipment manufacturers and the authorized spare part dealers in your area, you are in for a good deal. You may need to put in a little extra effort but this will save you a great deal of money and a lot of unwanted car issues later.

Just know which of the Suzuki car spare parts you need to change in your Suzuki car and find the right dealer like bpautopartsindia for the same who is offering the best competitive price with the warranty. Do not make a choice for a duplicate or a replica in the greed of a little lesser money. This may cause a lot of suffering later, and you may end up shelling more money than you saved in the auto spare part deal. Be smart and drive your car smartly.

Quick Steps to Replace a Ballast Resistor

The auto part experts of one of the leading Suzuki Car Spare Parts suppliers in this blog will explain Quick Steps to Replace a Ballast Resistor. But first, lets’ understand what a Ballast Resistor is.

A ballast resistor is a long, white ceramic car component connected to the left side of the ignition coil assembly. It is basically housed in series along with the primary winding in a battery ignition system to help regulate the flux of primary current. This regulation of the flow of current prolongs the life of the points where the contact of current breaks. The primary function of a ballast resistor is therefore to prevent the overheating of the primary winding of the ignition coil. The ballast resistor is fabricated with an iron wire and the iron wire has the capacity that at low speeds it increases the resistance which decreases the amount of current in the primary circuit of the ignition system. But if the current from the primary winding flows continuously, this increases the electrical resistance and the temperature of the ballast resistor, thereby reducing the flow of electric current flowing through the primary winding. This substantial decrease in electric current flowing through the primary winding prevents the overheating of the primary winding.

So if the ballast resistor is broken, the ignition coil will not be able to get proper voltage. BP Auto Spares India has put together a blog explaining the quick steps to replace a Ballast Resistor.

Suzuki Spare Parts

Tools Required

  • Voltmeter
  • Open end wrench
  • Ratchets
  • Sockets
  • Sandpaper
  • Screwdriver
  • Safety gloves
  • Vehicle owner manual

Quick Steps to Replace a Ballast Resistor

  1. First, you need to make sure if your car actually has a ballast resistor. For this, you’ll need a Voltmeter. Connect a voltmeter to the two given leads on the ignition coil and turn on the ignition.
  2. If the voltmeter displays reading somewhere near 12 volts, then it is highly unlikely that your car has a ballast resistor. But if the reading comes somewhere between 6 and 9 volts, then it is highly likely that your car does have one.
  3. After making sure that your car does have a ballast resistor, get down to the task of locating it.
  4. Open the hood of the car and right at the rear of the engine, you will see the ballast resistor bolted to the firewall of the coil. As we have mentioned before it is provided in series with the primary winding in a battery ignition system between the ignition switch and the positive terminal on the ignition coil.
  5. Now, picking up an appropriate box wrench or socket, disconnect the negative terminal on the battery. Once the negative terminal battery is removed from the battery, put it somewhere out of the direct reach of anything metal. You can cover the terminal end with a towel or a masking tape, just to be safe.
  6. After this, unplug the wire connecting the coil to the distributor. This step is important to make sure you are safe from any possible electric discharge.
  7. Next comes, the removal of positive lead to the ignition coil. The ballast resistor has its own secondary wire with a round or U-shaped wire terminal end attached to the positive coil lead stud.
  8. Now there are two wires coming from the ballast resistor. One of the wires comes from the ignition switch while the other one connects to the ignition coil positive terminal.
  9. Once the wires are removed, un-mount the ballast resistor from near the ignition coil using appropriately sized box-open end wrench. You can also take help of a ratchet or socket.
  10. After removing the ballast resistor from its throne, thoroughly clean the connecting surface between the resistor and the point where it was hanged using sandpaper or a small wire brush. Since the ballast resistor is known for generating a lot of heat, properly cleaning the surface between the resistor and the mounting point will aid in the heat transfer.
  11. Put the new ballast resistor back on and connect the positive lead to the ignition coil. Reconnect the wire connecting the coil to the distributor and make sure all the wire leads are properly connected and tightened.
  12. Reconnect the negative terminal on the battery after removing the masking tape or towel you might have used to cover the ends. Since you are working on the battery terminals already, make sure you are wiping them clean with a clean and dry rag.
  13. Now turn the ignition switch back to open and give your vehicle a start. If your vehicle is starting just fine, then you have successfully resolved the issue.

BP Auto Spares India is the largest Suzuki Parts dealers, suppliers, distributors, exporters and importers boasting a ready stock of OEM quality accessories and spare parts of major automobile brands. If you are doing the job of replacing the ballast resistor yourself, then get your new ballast resistor from BP Auto Spares India.

Suzuki Car Spare Parts

Let’s Understand How Catalytic Converters Work?

The auto part oracles of one of the leading Suzuki Car Spare Parts dealers says that for the past 60 years the automobile industry by way of latest tools and technologies are trying to curb the ever-rising levels of harmful emissions and polluting chemicals produced by the internal combustion engines. The 1960s was the year where we finally saw the development of effective emission control systems being installed in passenger cars. With stringent federal laws and emission level limits, the 1970s saw the major transformation in vehicle composition and design, as they try to keep up with the strict car-environment policies and norms. Though the vision behind the development of these emission control systems is to welcome a cleaner running vehicle to the world, these said systems in order to match up with the vehicle design and composition, gave birth to some disapproved car modifications. These car modifications in order to adapt fully with the emission control systems bring about some unusual changes in the performance of the cars like decreased vehicle power, decreased fuel efficiency, and an overall deterioration of engine driveability characteristics which led to people abandoning emission control system cars.

In the midst of these crises, another new emission control device graced the automobile arena which till now is the best mean of reducing engine pollutants and that is Catalytic Converters.

Catalytic Converters as we have already discussed in one of our blogs is the modern day emission control device which deals positively with the polluting chemicals and vehicle emissions produced by internal combustion engines. Due to lack of proper amount of oxygen in these engines, the carbon fuel fails to get oxidized properly into carbon dioxide and water which leads to harmful carbon emissions. Catalytic Converters are located in exhaust systems to provide a platform for complete oxidization and reduction of toxic ruminants like nitrogen oxides, carbon monoxide, and hydrocarbons present in the fuel into less polluting substances such as carbon dioxide, water vapor, and nitrogen gas.Suzuki Car Spare Parts

How Catalytic Converters Work?

The Catalytic Converters are situated between the engine and the exhaust tailpipe. Before the launch of catalytic converters, the toxic gases made by the internal combustion engine blew straight out of the exhaust tailpipe and into the atmosphere.

Catalytic Converters works differently than other emission control devices. They change the chemical composition of the gases in the internal combustion engines by rearranging the atoms from which they’re made.

  • The molecules of the toxic gases and polluting chemicals are transported from the engine past the catalyst made from platinum, palladium, or rhodium.
  • This gauze like catalyst breaks down the molecules into their natural atoms.
  • These separated atoms again reconcile into molecules of less harmful and toxic substances such as carbon dioxide, water vapor, and nitrogen gas.

For more information on Catalytic Converters please visit the website www.bpautosparesindia.com or call the experts of BP Auto Spares India +91-11-23824308 or write to us @ info@bpimpex.in

Let’s Talk In Detail about Vehicle-to-Everything Technology (C2VX).

Let’s Talk In Detail about Vehicle-to-Everything Technology (C2VX)

The industry experts of one of the leading Suzuki Spare Parts dealers are highly impressed by the way the automotive electronics industry is gearing towards constant revolution year-after-year with the primary objective of making the cars safer, greener and to enhance the overall driving experience.

A steady increase and constant advancements in the wireless communication technology, radar sensor amalgamation, imaging technologies, Internet-of-Things and Big Data have opened new gates for the automobile industry and the manufacturers to explore the nooks of these technologies and device multiple solutions for a wide range of applications. The trend to manufacture ever smaller mechanical, optical and electronic products and devices, huge leaps in navigation systems and the inclusion of even smarter devices has pushed the boundaries of Vehicle-to-Everything Technology (C2VX).

Vehicle-to-Everything Technology (C2VX) today and tomorrow will play a huge role in the development of Internet-of-Things (IoT). It is to be believed with the way the car technologies are progressing that the smarter or the connected cars of the future will interact only among themselves and with the environment around.

Vehicle-to-vehicle (V2V), vehicle-to-infrastructure (V2I) or collectively known as Vehicle-to-Everything Technology (C2VX) belongs to the troupe of wireless technology which is entirely focused on enhancing the road safety, improve traffic management and to bring in the new concept of Intelligent transport system (ITS) which is proficient in reducing the environmental impact over the vehicle.

A Vehicle-to-Everything Technology (C2VX) functions on 5.9GHz Dedicated Short Range Communication, which is a form of WiFi. This derivative of Wireless Fidelity is specially designed for fast moving objects which enable vehicles on the road to interact with each other, communicate their state, their position, speed, surrounding, and destination to other vehicles on the road and also to the infrastructure.

The technology while keeping in check its surrounding also alerts driver of the potential risks and dangers on the road such as collision, crash, pedestrian nearby, unsafe overtake, vehicle breaks ahead, road hazards or the car in blind spots, thereby reducing the overall impact of the surrounding environment over the vehicle by improving collision avoidance and reducing fatalities and injury severity.

Due to these amazing safety benefits of Vehicle-to-Everything Technology (C2VX), The Global Automotive Vehicle-to-Everything (V2X) Market is poised for strong growth during the forecast period 2017 to 2027. Ford and telecom chip maker Qualcomm has also decided to take their partnership forward so that they can explore the nooks of C2VX further.

Quick Steps to Replace a Proportioning Valve

Quick Steps to Replace a Proportioning Valve

Quick Steps to Replace a Proportioning Valve

The automotive car parts experts of one of the leading Suzuki Parts dealers, BP Auto Spares India says that though each and every part of your car plays a quintessential role in making it run on the road, special attention must be paid to the brakes of a vehicle, because without it there is no way you can bring a car to a complete halt. There are varied numbers of valves that are there in the car braking system, some of which work in harmony with the brake master cylinder while others work independently from the master cylinder.

One such valve is the proportioning valve.

What is a Proportioning Valve?

A proportioning valve has a vital role to play in vehicles that have disc brakes installed on the front wheel and drum brakes on the rear wheels. What happens is that since the disc brake pads are in contact with the disc and the drum brake shoes are not in contact with the drum; if a proportioned pressure is not applied the disc brakes would be activated before the drum brakes upon depressing the brake pedal. The proportioning valve carries out this important function of engaging drum brakes before the brake discs.

The proportioning valve applies a proportionate pressure to the rear wheels on the front wheel drive cars to prevent locking up when you suddenly. This ability to engage the rear brakes first before the brake disc provides control and stability to stop the vehicle safely.

But what if these proportioning valves go bad or start malfunctioning? We will take the vehicle for proportioning valve replacement to a local mechanic or do it on our own.

Suzuki PartsSteps to Replace a Proportioning Valve

Tools Required

  • Wrench set
  • Boxed end wrenches
  • Safety glasses and Gloves
  • The new set of proportioning valves
  • Floor Jack
  • Jack stands
  • Socket Set

Step 1: Since a Proportioning Valve is located under the master cylinder on the driver’s side of the engine compartment, you have to go under the car to get things done. For this, you need to raise the front of your vehicle with the floor jack and secure the front tires with the triangular jack stands.

Step 2: You will be able to access a proportioning valve with much ease with the front tire removed. Use a lug wrench or impact wrench to pry off the front tire.

Step 3: There is only one way you can easily remove a Proportioning Valve from the vehicle and that is by disconnecting the brake lines coming out of it and also the wire harness that is connected directly to the low brake fluid light on your dash. Use an open-ended wrench to disconnect the brake line from the valve.

Step 4: Now with the help of a ratchet set unbolt the screws that are keeping the Proportioning Valve in place and remove it.

Step 5: Once the old valve is removed, immediately get on the task of replacing it with the new one securing it with the bolts you previously removed.

Step 6: Once the new Proportioning Valve is in its place, put the harness back on and reconnect the brake lines.

In case you are looking for a new set of Proportioning Valves then you can check the wide assortment of automotive parts, BP Auto Spares India stocks for major car and truck models.